Regency 4734 Instrukcja Instalacji Pobierz pdf (Strona 19)

Regency

Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98

4.2 Stepping Through the Program

By pressing TEST, you can view the current option settings in a menu. The option description

appears on the top line, followed by the current setting. The bottom line shows which keys can

be used at that step of the program. In some cases, the key name will be followed by a word

that explains how the key is used.

EXAMPLE: TEST - ENTER means you use the TEST key as you would use the

ENTER key on a computer, to enter data into the program.

Press TEST again to proceed to the next option without changing the one you just viewed.

Some of the menus (ACCESS, for example) repeat options for many numbered items. The first

step in the loop may allow you to choose which numbered item you wish to program. The

menu will automatically advance to the next numbered item when it reaches the end of the

options for the current item.

4.3 Programming the Options

For some options, the available choices are numbered and appear on the bottom line of the dis-

play. To program an option, key in the number of the desired choice. The top line of the touch-

pad display will show the new value.

For YES/NO options, press 0 for NO and 1 for YES.

Press TEST. The display will advance to the next option.

4.4 Correcting Errors

To CORRECT AN ERROR you made or to clear displayed data, press CLR. The LCD will

show “0” or the first choice. Enter in the correct data, then press TEST.

To restore factory default data, press the CHM key. This will cancel the new data and restore

the default data. Press the TEST key to advance to the next option.

NOTE The CHM key will restore the factory-programmed default value to any option.

4.5 Entering Text

There are several menus that require text and other characters to be entered (for example, zone

location descriptions). The display will show the current programmed text on the first line of

the display, with an underscore character (or “cursor”) denoting the end of the programmed

text. The second line will show the option name momentarily, followed by numbered groups of

symbols.

4.5.1 General Form

To enter text or characters, follow the procedure below and refer to Table 4.

1. Find the character you want in the area below and to the right of the double lines.

2. Press the digit to the left of the vertical double line in the same row.

3. Press the digit above the horizontal double line in the same column.

The character will appear on the top line of the display. Continue selecting characters this

way, until you have finished programming the message.

To erase the last character, press STAT. Pressing BYPS will move the cursor to the right,

entering a blank space after the last character. Pressing CLR will erase the text and place

the cursor at the beginning of Line 1.

If you select the wrong group of letters when you press the first digit, press MUTE or

CLR to return to Step 2.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Regency 4734 Instrukcja Instalacji Strona 19

Komentarze do niniejszej Instrukcji