Regency 4734 Instrukcja Instalacji Pobierz pdf (Strona 13)

Regency

Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98

Plug the Model 4181 into a 120 VAC, 60 Hz wall outlet to the panel. Use a 4-wire modular

phone cable (P/N 130071, supplied) to connect the 4181 to the modular jack (P5) on the 4734

as shown in Figure 2. The maximum length of the cable is 20 feet. The 4181 is optically iso-

lated from the powerline.

NOTE The modular connectors on both the 4734 and the 4181 must NOT be connected to a phone

line or anything other than each other. The X-10 modules may be distributed throughout the

building.

To install the X-10 modules, plug them into outlets close to the appliances you want them to

control.

Figure 2: Model 4181 Connections

M odel 4720

Model

4734/4734-2

8457G20A.DSF

Do not connect P5 to a phone line.

The 4181 LED is normally on when power

is applied. The LED flashes during transmission.

Modular Cable

Model 4181

(PL513)

Power Line

Interface

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Brak uwag

Regency 4734 Instrukcja Instalacji Strona 13